I like to build one of these resistors into my models, they allow current measurement without having to open the motor circuit. All you have to do is measure the voltage across the resistor (see diagram below). The current is equal to the voltage divided by 0.05. So 50 millivolts equals 1 amp, 100 millivolts equals 2 amps, etc.. Connect 2 in parallel for higher currents.

• Resistance 50 milliohms, + or - 1%
• Rated for 5 watts, 10 amps max.

Needed for connecting the Smartcontrol to a receiver with Deans-type connectors. 8 inches long.

Replacements for jumpers used on A.L.F. and Smartcontrol. Package of 5.
Available in 2 sizes:

• 2 mm size for Advanced Smartcontrol
• .1" size for all other Smartcontrols, SPB, and A.L.F.

Plastic Case

Our generic black plastic case is avaliable as an option for our Tiny Smartcontrol, A.L.F., or any of our voltage regulator boards.
Physical dimensions (with optional case):

• 2.4" long x 1.85" wide x 0.925" high
• 61 mm x 47 mm x 24 mm