Receiver Connector Options
Futaba Connectors
The standard receiver connector is similar to the Hitec "D" style
connector (shown above on the left). These connectors will plug into just about
any type of receiver, but lack the key tab found on Futaba connectors. The genuine
Futaba connector is available as an option on the Smartcontrol for a slightly
higher price.
Alternate Wiring for Older Airtronics Receivers
Some older Airtronics Receivers ( such as the one shown
above ) use a non-standard wiring pattern. If you are using this type of
receiver, you can order your Smartcontrol with the non-standard wiring for no
extra charge. This option is available only with the
standard receiver connector. The wiring difference is shown below.
Go to Main Page