Jump to: Introduction Specifications Options

Using the latest surface mount technology we shrunk our original Smartcontrol and created the Tiny Smartcontrol (SCT). At just 1.8" by 1.4" (without case) this control will be ideal for small models such as plastic model battleships and the Lindberg tugs. Yet Tiny Smartcontrol retains almost all the features of the original Smartcontrol, just one of the accessory switches was deleted. Tiny Smartcontrol is available in both high and low voltage versions and you can pick the maximum current which best protects your motor. Also Tiny Smartcontrol can be purchased with an optional plastic case. 

To view the SCT online user's manual, click here. 

The SCT is NOT compatible with the 2.4GHz Spektrum RC System. 

SCT features;

• Fully proportional forward and reverse motor control.
• Built-in current limiting protects your motor and the control in case of shorts or stalled motor. Current limiting has a start-up delay to allow high current surges during start-up. When current limiting is activated, it automatically resets when throttle stick is returned to neutral position.
  Standard limit currents are (custom limits are available, contact us for a price quote)  :
  • 6.6 amps
  • 4 amps
  • 2 amps
  • 1 amps
• Optional 1 amp accessory switch. The switch is activated by setting the control stick and trim lever to full reverse. The Smartcontrol will stop the motor and start to sequence through on-off states. Setting the trim lever back to center resumes normal operation.
• Compatibility tested with:
  • 2 Channel - Futaba, Hitec, and Airtronics.
  • 4 Channel - Futaba.
  • 5/7 Channel - ACE Nautical Commander

SCT Specifications

• Physical dimensions (without case):
  • 1.8" long x 1.4" wide x 0.5" high
  • 46 mm x 36 mm x 23 mm
• MOSFET output, all digital design, no pots to adjust, no relays.
• Receiver connector supplied will connect to Futaba "J" type receiver. Adapter cables available for older Futaba "G" type receivers and for ACE receivers with DEANS-type connectors.
• Recommended battery voltage range (high voltage type): 7.2 to 12 volts.
  Recommended battery voltage range (low voltage type): 4 to 8.4 volts.
  WARNING - Do not use low voltage controls with a 12 volt battery.
• One year limited warranty.
• Compatability guarantee: If Tiny Smartcontrol is not compatible with your radio you can return it within 30 days for full refund ( less shipping ).

Optional Plastic Case

• 2.4" long x 1.85" wide x 0.925" high
• 61 mm x 47 mm x 24 mm